Wall-Mounted Bi-Directional Mic/Line Dante Interface 2 x 2

About this product

<h4>Wall-Mounted Bi-Directional Mic/Line Dante Interface 2 x 2</h4><p>The DD-BN2ML is a complete wall-mounted Dante audio network interface. It features one XLR mic or line input and one mono-summed Mini-jack line input on the front panels plus two-line outputs on a rear-panel detachable terminal block. Special software is not required to configure the DD-BN2ML. The XLR input provides three switches that may be set from the front of the unit when the cover plate is not installed. One switch enables or disables P48 phantom; the second switch selects the mic or line gain range; the third switch sets the gain. The Mini-jack input accepts mono or stereo unbalanced line-level sources that are summed to mono. Each rear-panel output provides a switch to set the output to balanced professional or unbalanced consumer level. The DD-BN2ML fits a standard US dual-gang electrical box or an RDL WB-2 back box for installations in thinner European or equivalent walls. The DD-BN2ML is PoE powered and is available in multiple finishes with optional customized graphics.<br /><br />The XLR input is converted to feed one Dante network transmit channel. Three gain settings are switch-selectable for both the mic and line input ranges to match condenser or dynamic mic levels and standard line levels.<br /><br />The Mini-jack left and right inputs are summed to mono to feed one Dante network transmit channel. This input provides a network digital audio level of -20 dBFS for an unbalanced -10 dBV input.<br /><br />Two Dante audio channels are converted to balanced line level on the rear-panel detachable terminal block. Each output provides +4 dBu balanced for a network digital audio level of -20 dBFS. Each output is equipped with a selector to unbalance the audio and attenuate the level to -10 dBV. These switches are located on the top of the chassis and are set by the installer prior to mounting the unit.<br /><br />The rear-panel outputs are intended for connection to RDL AMS connectors mounted in Decora-style plates that match the DD-BN2ML. AMS audio connectors include RCA Mini and XLR jacks. The output plate may be located together with the DD-BN2ML in a triple gang box or may be mounted remotely in a single box.<br /><br />Valid PoE power and synchronization to the Dante network are indicated by green LEDs visible from the front of the unit.<br /><br />The DD-BN2ML is a professional grade product with a discrete mic preamplifier for studio quality fidelity and low noise performance coupled through a metal XLR jack housed in a stainless-steel chassis with dual powder-coated or stainless-steel Decora front plates.<br /><br />The DD-BN2ML&rsquo;s superior performance specifications make it ideally suited to the most demanding installations and an exceptional value in commercial networked audio systems. This full-featured product is engineered and manufactured in the U.S.A for continuous duty in demanding installations. Designed to outperform. Built to last.<br /><br />&bull; Dante Network Interface for Two Audio Inputs and Two Audio Outputs<br />&bull; XLR and Mini-jack Front-Panel Inputs; Outputs on Rear-Panel Terminal Block<br />&bull; Converts One Mic or Line and One Consumer Line Audio Source to Dante Network Channels<br />&bull; Converts Two Dante Network Audio Signals to Line Level<br />&bull; Special Software Not Required for Module Setup<br />&bull; XLR Input is Switch Selectable for Mic or Line<br />&bull; Switch-Selectable Mic Gain: 40 dB 48 dB or 62 dB<br />&bull; Switch-Selectable 48 V Mic Phantom (P48)<br />&bull; Switch-Selectable Line Gain: Unity 12 dB or 19 dB<br />&bull; Mini-jack -10 dBV Input is Summed to Mono<br />&bull; Each Output is Switch Selectable for Balanced +4 dBu or Unbalanced -10 dBV<br />&bull; Studio Quality Low-Noise Performance<br />&bull; High Resolution 24 Bit Analog to Digital and Digital to Analog Conversion<br />&bull; Legendary RDL Analog Filtering Enhances Superb Audio Performance</p>